Still in the effort to get it right for the ppt slides. I want to confirm if you can add 2 to 3 slides to what I already did.
Check I have uploaded example of what is needed, please.
Slide to include
Slide 1. Block Flow Diagram and Stream Description for Model,
Quantitative block diagram
• Shows the conditions and results of the mass and energy inputs/outputs as well as typical conditions such as temperature, pressure, mass or volume flow rate, phase. This quantitative data will be inside the block diagram rather than the name of the units. Energy balances are carried out to evaluate the energy requirements of the process i.e. heating, cooling and power requirements.
• Showing the underlying formulae at each unit. Energy balance equation and mass equation and any formula peculiar to a particular unit such heat exchangers, continuous stirred tank reactors, plug flow reactor, condensers, heaters,
CONSERVATION OF ENERGY
The law of conservation of energy can be stated as: “energy can neither be created nor destroyed”. This law is the basic principle that governs energy balance calculation. It can be written as Rate of:
Accumulation = Energy in – Energy out + Generation – Consumption.
NB: It was demanded I present completed model, underlying formula and calculation during the extra panel.
The question first appeared on Related